FIGURE 9(R) CARABINER ROPE TIGHTENER in metal color – large L

The innovative and patented tightening carabiner with the Nite Ize FIGURE 9(R) lock is used for tightening, fastening, connecting and securing ropes and ropes without the use of knots. The carabiner is the same as its predecessor, but it also has a lock to close the carabiner. Figure 9 with a lock can be tied in three ways and securely anchored like a carabiner wherever it can be snapped. This carabiner makes tightening, anchoring and loosening ropes and cords an absolutely simple matter.
You can use the carabiner to tie firewood, secure cargo on the body, stretch the tent, mooring boats, just about anything that needs to be tensioned, tied, tightened and tightened. The carabiner is made of light and durable aluminum, so it will get you minimal. You can bind both straight lines and create drawstrings with it. And if, on the other hand, you want to untie or loosen the thing, just unhook the rope or rope and safely release it slowly over the prepared cut-out. In addition, the carabiner has the directions of the rope guide marked by a laser on the body. So you can’t make a mistake.
Features:

tying, tying and tensioning ropes without knots
a smart alternative to classic rubber boots
three ways of anchoring

loop
one fixed point
anchoring with a carabiner

laser marked rope direction for easy use
light and strong aluminum construction
stainless steel carabiner lock
two sizes S small and L large

size S small:

for ropes and ropes with a diameter of 2 to 5 mm
lock opening width 9mm
maximum load 22.5kg
dimensions: 33.52mm x 68.57mm x 7.7mm
weight: 13 g

size L large:
for ropes and ropes with a diameter of 3 to 9 mmlock opening width 19mmmaximum load 67.5kgdimensions: 116.06mm x 56.39mm x 12.82mmweight: 54 g
NOTICE:
Not intended for mountaineering! Not suitable where disconnecting the carabiner could endanger health or damage property.